Material Managing Energy UNIT 2
Basic Description
This power unit attributes electrical power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the reducing speed managed through the strain compensated movement manage valve. Items of this series could be extensively utilized in the field of logistic devices like fork lift, mini lift table, and so forth.
Special Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
4. Oil shifting is needed following the first 100 operation hours,afterwards when every single 3000 hrs.
5. The electrical power unit needs to be mounted horizontally.

Materials Handling Electrical power UNIT 1
Basic Description
This energy unit is intended for your fork lift field, consisting of hugely productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down movement are managed through the lever with the guide release valve, which can be equipped with an electrical switch to activate the motor. The lowing velocity is managed through the pressure compensated flow control valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned just before set up of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil modifying is required just after the first one hundred operation hrs, afterwards after each and every 3000 hrs.
five. The energy unit proven is made to be mounted horizontally.