we offer one-stop solution for the purchase of mechanical chain,power transmission parts and pto shaft, agricultural gearboxes products in China.
Overview
Quick Details
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
Our company is located in XiHu HangZhou Zhejiang Province. T
- Type:
-
parts
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
Machining of the gearbox To make a worm gearbox, first take a blank of an alloy. A bronze bearing is made in the center of the blanIn our company we are aware of the importance of the users’ safety. That’s why our PTO’s are produced according to legal regulations and European directives and bear the CE sign. A key factor for safety assurance is the accession in the products’ development phase. By all means, the users’ knowledge about the correct use of a PTO drive shaft is vital. This means, that every users’ duty is to read and follow the safety instructions.k. The hobbing cutter is then used to reduce the diameter of the blank relative to the finished height of the tooth tip on the gear wheel, so the depth of the cut needs to be added to the blank’s diameter. The necessary threading tool is grind to cut the worm. The side clearance on the left-hand side of the cutter tip is allowed for the worm’s pitch angle. The best finish is put on the cutting tool using a slip stone. Gear blank is then mounted on a turntable that acts as a bearing support. This bearing support is mounted on the rear of the lathe cross-slide with the hobbing cutter mounted between the centers. The two worms are then machined, out of which one is made the cutter and finally the cutter is used to machine the worm gear.
TYPE | BS-50 | BS-80 | BS-100 | BS-125 | BS-160 | BS-200 | BS-250 | BS-315 | BS-400 | |
Displacement(ml/r) | 51.7 | 80.5 | 100.5 | 126.3 | 160.8 | 200.9 | 252.6 | 321.5 | 401.9 | |
Max.Pressure.Drop(Mpa) | cont. | 14 | 14 | 14 | 14 | 14 | 12.5 | 11 | 9 | 7 |
int. | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 15.5 | 14 | 11 | 9 | |
peak. | 20 | 20 | 20 | 20 | 20 | 18 | 16 | 13 | 11 | |
Max.torque(N.m) | cont. | 93 | 152 | 194 | 237 | 310 | 320 | 380 | 380 | 380 |
int. | 118 | 189 | 236 | 296 | 378 | 398 | 470 | 470 | 470 | |
peak. | 135 | 216 | 270 | 338 | 433 | 460 | 540 | 540 | 540 | |
Max. Speed | 770 | 745 | 595 | 475 | 370 | 295 | 235 | 185 | 150 | |
(cont.)(r/min) | ||||||||||
Max.Flow(cont.)(L/mim) | 40 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | |
Max.Output.Power(cont.)(Kw) | 7 | 10 | 10 | 10 | 10 | 7 | 6 | 5 | 4 |